FUNCTIONALITY

Here you can find the training video and application examples for the Leak Stop Gun. In addition, please always refer to the operating instructions.

By operating the trigger, the sealing ball is driven out of the barrel by CO2 and can thus seal the existing leakage. This process is monitored by two pressure relief valves. By opening/closing the outlet valve and the trigger, the sealing surface of the sealing ball can be optimized.

Step 1:

Item Designation
1 pressure relief valve
2 Pressure 5 bar
3 pistons
4 Sealing ball
5 CO2 pressure vessel
6 Control valve

Step 2:

The sealing ball (1) is inflated with 1.8 – 2.1 bar (3) and can thus seal the existing leakage. The piston including tube extends until the bore (2) is exposed. The pressure thus flows into the pipe. The pressure is controlled by the pressure relief valve (4).

Step 3:

You reduce the pressure with the aid of the drain valve (1).

You can optimize the sealing surface of the sealing ball by opening/closing the drain valve and the lever. By opening only the drain valve, the sealing ball will collapse and the Leak Stop Gun can be removed from the leak.